SurClaro Flight Simulator Resources Forum Index SurClaro Flight Simulator Resources
Flight Simulator & Aviation forums
 

Post ATIS Contact landing
Click here to go to the original topic

 
       SurClaro Flight Simulator Resources Forum Index -> Lessons
View previous topic :: View next topic  
Author Message
hi09



Joined: 31 Jul 2007
Posts: 21
Location: Toronto, Ontario - Canada

Posted: Fri Aug 31, 2007 5:05 pm    Post subject: Post ATIS Contact landing  

I flight planned a flight from St Catherines to Toronto CYYZ air port - once i got the okay to take off and all - 2 questions:

1. I selected CYYZ as my destination airport and clicked find route, this resulted in a pink line in my GPS which directs me to the airport which is fine - my question is once i am in the air and i want to contact that air port, why is it so diffuclt to find the air port - i have to keep toggling through the air ports near you b4 i find it and finally i tune it...am i doing someting wrong?

2. My default when i am taking off i noticed heading bug to 24 - so when i am in the air i bank to that heading and sure enough i am en route the pink line on my way to the air port - question is once the contact my landing air port i request clearance for a full stop landing and he tells me - runway 6L and altimeter 2992 - i am not sure what this mean - does it mean i should start heading in direction 60? and what does 2992 mean?

please and thank yous
Back to top  
Cat1



Joined: 02 Jul 2004
Posts: 1164
Location: KFTW (Meacham Intl, Ft. Worth)

Posted: Fri Aug 31, 2007 5:09 pm    Post subject:  

I'm going to point you to the sim lessons portion of FS9.
These questions are answered in them.
Back to top  
hi09



Joined: 31 Jul 2007
Posts: 21
Location: Toronto, Ontario - Canada

Posted: Fri Aug 31, 2007 7:40 pm    Post subject: sorry  

thanks cat, i miss understood, are you saying that i should go look around there or did you want to give me a specific link?
Back to top  
groundsquirrel



Joined: 10 Mar 2004
Posts: 3638
Location: Navarre,Florida-USA (KVPS,KHRT,KPNS)

Posted: Sat Sep 01, 2007 2:30 am    Post subject: he means...  

he means that there is a large glossary in the FS learning center. Start FS, at the opening menu (aircraft selection) screen, look on the left and select Learning Center. The learning center for Fs9 was one of the most improved parts of FS and is very complete in my opinion from a user level.
Back to top  
Cat1



Joined: 02 Jul 2004
Posts: 1164
Location: KFTW (Meacham Intl, Ft. Worth)

Posted: Sat Sep 01, 2007 2:33 am    Post subject: Seems you are my new project..LOL  

Chances are you are either to far away to contact the airport, or you have selected a VFR flight profile. This means you have to fly the airplane into the "local" Toronto airspace before they are going to want you to talk to them.
If you are 30 miles away from the airport, the tower at Toronto doesn't really care. You are outside their zone of control. You are still under the guidance of Toronto Center. Toronto Center is not the airport, and the don't care what you want to do, they just want you out of their airspace and to pass you off to some one else, like Toronto Approach Control. This is why you are scrolling through radio frequencies and have to look for the airport, you are simply not close enough to talk to who you think you should be talking to.

Thanks GS :)
Back to top  
hi09



Joined: 31 Jul 2007
Posts: 21
Location: Toronto, Ontario - Canada

Posted: Sat Sep 01, 2007 3:47 am    Post subject: ahh  

Cat1 you are awesome that helps just tried it and tunning into CYYZ like a charm - let me much around and see what progress i can make ! thanks
Back to top  
 
       SurClaro Flight Simulator Resources Forum Index -> Lessons
Page 1 of 1


Powered by phpBB Search Engine Indexer
Powered by phpBB 2.0.13 © 2001, 2002 phpBB Group