SurClaro Flight Simulator Resources

After years of flight sim all my lights at airports and on planes are now square blocks, i have tried everything, Have i removed a file?
My system is 1.4 AMD 500megs ran gforce 2 32meg anialator 19inch monitor, I have updated the drivers and even tried a different graphics card

Help Question

Pete

Posted: Wed Nov 06, 2002 7:02 pm Post subject:

Wilson it sounds to me like you need to go into your settings while in the game or even before you pick your aircraft. Then hit display and check all your settings to the highest graphics you can, and check every box. If you have a fast PC then use them wisely. You can always taper down in case the graphics are too much for your machine and may tax the memory.

Next click on your AIRCRAFT tab at the top and check all the boxes at the bottom. Just slide all the graphics bars to full. Plus what resolution are you running your game? Go to your next tab which is HARDWARE and you might want to run your PC at a higher resolution which will shrink your graphics to a smoother look and reslistic feel. I run mine at 1024X768X32
If you run at the 600X or 800X resolution, your graphics will be more rigid and squared. ( I run a Celeron 1.1 gig with 385 Megs or ram with a Gforce4 420 MX.) and I do just fine.

make sure your filters is set to Bilinear and harware Rendering & Lighting is set to Mip Mapping and Multi Texturing.

And set Light bar to full.

And last but not least make sure your Hardware Acceleration is checked, this might be your problem?
Hope this helps? >S<